Delineator for separating traffic lanes - buy at a low price in Ukraine - choice, availability
Rubber road delineator is used:
- when separating lanes for public transport,
- to separate the lane of the bike lane,
- delineator separates oncoming traffic lanes on public roads
- in large parking lots and highways.
The delineator is effective wherever it is necessary to separate traffic flows from each other.
Delineator - Kyiv, Odessa, Lviv, Kharkiv, Dnipro
We offer three types of rubber road delineators:
1. delineator DS4, DS42, DS43 as a row of rubber posts 75cm or 1m high
Delineators made of rubber posts are made up of a number of guide posts DS4, DS42, DS43, which are installed between each other at a distance at which cars cannot pass between them - usually 1.5 - 1.7 meters.
This type of delineator makes it impossible to access fenced off areas, at the same time it allows you to lengthen the structure indefinitely (and the sections of the rubber delineator RCS are combined with each other so tightly that they reinforce the entire structure as a whole)
3. combined delineator DL02, DL03 - is an alternation of a delineator made of a rubber strip with reflectors and posts.
The new engineering solution Lemus is the DL-02 delineator, the formula of which is 2 sections of the RKS rubber delineator + a DS4 rubber road dividing post. This type of demarcation is effective, aesthetic, durable and resistant to unpredictable collisions. Each element of the delineator has been tested in very dense traffic: the orange road signal bollard increases the visibility of the fence, and the sections of the rubber wheel bumper make the design of the DL-02 delineator stable and durable. The design is stable, simple and easy to transport. The delineator DL-02 is mounted on the mounts KR02 and KR04.
Lemus road delineators are a modern engineering solution that aims to:
use different delineators to delimit the lane of public transport
involve delineators in access control to safety islands
functionally delineate areas of large parking lots and warehouses with the help of delineators.
Rubber road delineators effectively and reliably perform the function of fencing and prohibiting access.
 |  |
|
|
|
| DS42 | DS43 | RKS01 | RKS02 | KR02 |
Rubber road dividing posts 1m high - DS43
Flexible columns for separating traffic lanes are installed at a distance of 1.5 - 1.7 m from each other.
Unlike plastic traffic bollards DS2, rubber bollards recover after being hit and can continue to be used normally.
Therefore, the initial higher costs compared to plastic road bollards pay off during the operation of the road dividers.
Lane separator - flexible column DS43:
Height - 1000 mm
Post Ø 80mm
base Ø 200mm
Reflective elements
Mounting holes - 3 pcs
Delineator made of rubber posts DS42
Guide posts DS4 (DS42) - road reflective - for separating traffic lanes on public roads, parking lots, bike paths, warehouses and logistics centers.
Designed for heavy road use
Post height - 750mm
post diameter - 80mm
base diameter - 200mm
Mounting holes 3pcs
Reflective elements
Delineators from a rubber strip (wheel sroppers) RKS
A collapsible structure, which is installed to separate traffic flows. Mounted with anchor bolts. Made from high quality durable rubber.
Rubber delineator 12cm high and 14.5cm wide for separating public transport lanes, cycle lanes, protecting walls in parking lots, warehouses and logistics centers.
Characteristics of RKS road delinators:
Rubber delineator height - 120mm
Section width - 145mm
Contrasting reflective markings on the side
Length - multiple of 610mm
Each section (610mm) is mounted on 2 anchors
Elements of RKS road delineators are connected to each other, creating a continuous line. They have an initial element with a beveled front and middle elements.
any length multiple of 61cm - calculated in accordance with the required length of the delineator
Combined delineators - rubber post-strip
An option when it is necessary to make a continuous obstacle course with markers. A rubber road post DS4, DS42, DS43 is installed between the rubber road delineator.
Set 2xRKS+1xDS4 (DS42) = DL02:
Post height DS4 (DS42) 750mm
The height of the delineator rubber RKS-120mm
RKS width - 145mm
Base diameter DS4 (DS42) - 200mm
Contrasting reflectors on DS4 and RKS
Length - 145cm (two sections RKS 61cm each + 1 column DS4 20cm)
Each section (610mm) is mounted on 2 anchors, DS4 - on 3 anchors
any length multiple of 144cm - calculated in accordance with the required length of the delineator
Post height DS4 750mm
The height of the delineator rubber RKS-120mm
RKS width - 145mm
Base diameter DS4 - 200mm
Contrasting reflectors on DS4 and RKS
Length - 205cm (three sections RKS 61cm each + 1 column DS4 20cm)
Each section (610mm) is mounted on 2 anchors, DS4 - on 3 anchors
any length multiple of 205cm - calculated in accordance with the required length of the strip
Watch the video An example of the separation of the bike path from the roadway - Sofia, Bulgaria.
