We have been doing professional installation of our parking and road equipment, including the installation of Lemus road bollards in Kyiv since 2005.
In order to order installation in Kyiv and the region,
choose the type and number of columns you need
then select the required installation option on this page according to the number of
make an order online.
Or call!
When ordering installation, the cost of a set of fasteners is included in the installation cost and delivery is free.
If you are not in Kyiv or want to do the installation yourself, the instructions below will describe the process of installing road posts in a parking lot, parking lot or garage.
Installing plastic and flexible road bollards is a process that you can do yourself.
For self-assembly, you will need a puncher, hammer and KR04 fasteners.
Installation of road posts DS 42, DS43, DS1, DS2 - installation instructions
Step 1: Preparing and marking the installation site
Prepare the installation site: make sure that the surface on which the post will be installed is flat and clean. Put the post in place of installation and through the holes in the post, mark the mounting points with a puncher.
Step 2: Drilling holes for installation
In accordance with the size of the fasteners, make holes in the markings according to the length and width of the fasteners. Remove debris from the installation site.
Step 3: Prepare the anchors
Insert the anchors into the pre-drilled holes in the surface where the post will be installed using a hammer. Make sure the anchors are level and firm.
Step 4: Install the road bollard
put the bollard on the marked spot and level it. Then fasten it with screws. Make sure the post is firmly attached to the anchors.
Make sure that the bollards are installed in a safe place and that they do not interfere with the movement of pedestrians or vehicles.
