We have been doing professional installation of our parking and road equipment, including the installation of Lemus rubber ramps in Kyiv since 2005.
In order to order installation in Kyiv and the region,
choose the type and number of ramps you need
then select the required installation option on this page according to the number of
make an order online.
Or call!
If you are not in Kyiv or want to do the installation yourself, the instructions below will describe the process of installing rubber ramps in a parking lot, parking lot or garage.
Installing Lemus PR rubber ramps is a process that you can do yourself.
For self-assembly, you will need a puncher, hammer and KR02 fasteners.
Installation of rubber ramps - installation instructions
Make sure that the ramps are installed in a safe place and that they do not interfere with the movement of pedestrians or vehicles.
Step 1: Preparing and marking the installation site
Clean the installation site of debris, dust and dirt. Put the ramp in place and mark the mounting points with a puncher by making small indentations in the road surface through the holes in the ramp.
Step 2: Drilling holes for installation
Move the ramp aside. In the places of marking, make recesses with a puncher in accordance with the dimensions of the fasteners. Remove debris from the installation site.
Step 3: Prepare the anchors
Insert the anchors into the recesses obtained and hammer them in with a hammer.
Step 4: Install the ramp
Put the ramp in the marked place and fix it with bolts to the anchors.
